Have you ever woken up in the middle of the night because of strange groans that seem to come from somewhere in your home?
Now, don’t be too spooked just yet. For all you know, these sounds are all coming from one source – none other than your boiler.
From a plumbing contractor that deals with boilers all the time, if you are a homeowner or renter, chances are you have been taking your boiler for granted most, if not all the time. Maybe all you do are yearly service checks or occasional pressure top-ups. The boilers in most UK homes are just left hanging on the wall, doing what they were supposed to do and that is to provide you with hot water and heat.
Unfortunately, your boiler is just like other electrical appliances. So, if something goes amiss, it may end up going wrong in ways you can never expect and imagine, it is likely you’ll need your boiler repaired. What’s with all those groans, then?
Find the Source of the Sounds
Most of the time, sounds can be quite misleading, particularly the ones heard inside homes. The very first thing you should do if your boiler produces some weird noises is to identify the exact source where the sounds come from.
Since sounds tend to echo and travel through your water and heating system, you need to establish first if your boiler is really the culprit behind the noise or if it is your central heating pipe or your radiator. All this kind of noises can have a variety of causes and reasons.
What Causes Groaning, Gurgling, or Dripping Noises?
A dripping, gurgling, or groaning sound can often be heard coming from the pipework or radiators. The number one reason behind this problem is because of the trapped air inside the boiler unit that combines with the water. However, it is important to remember that no air should be present inside the boiler at all.
You don’t have to worry about trapped air and you can easily resolve it if you bleed the radiators. Although this is not risky, you have to know that the trapped air in the unit may hinder the heat from totally radiating all over the room. This can make the boiler use up more gas and stay on for a longer time that it actually should.
Since it may result to higher heating bills once the colder months kick in, it is recommended that you bleed the radiators right from the moment you hear constant groaning, gurgling, or tapping noises from the boiler.
Every now and then, groaning noises may also be the result of a frozen condensate pipe. Unfreezing the pipe will be able to help resolve this issue. You need to do this as soon as you can to prevent additional damages to your unit.
How about Vibrating Noises?
There are various factors that can cause vibrations in the boiler. These include a broken pump shaking within the casing or an improper pump setting such as putting it on too high.
This might also be due to a sludge build-up inside the unit. This kind of build-up is potentially risk since the excess sludge may lead to overheating. You need to hire a qualified engineer once you start hearing this sound.
A leaky problem always means bad news. Good thing that plumbers are here to the rescue!
Plumbers use different types of leak detection equipment for quick and accurate detection of the sources of leaks.
Identifying the Source of Water Leaks
Prior to using any specialist equipment, the plumber will inspect your house first to check for potential signs of leaks. It will include checking fixtures, inspecting all the sinks in the house, and going through the pool and irrigation system. They also typically check the water meter as well to get a good idea of the amount of water being used.
Here is quick look at the different tools that plumbers use for finding leaks around homes:
Ground microphones and listening discs are among the most basic types of tools that emergency plumbers use to pinpoint and detect water leaks. A listening disc is special equipment that will help the plumber in finding leaks through the cabinets, drywall, as well as other furnishings.
With the use of sound technology, a listening disc amplifies the sound of the water leaks back through headphones once placed against the surface. Skilled technicians can listen for the sound of the running water underground while it travels through the pipes. It will give the plumber a much better idea of the location of the leak before they try getting to it. Deck plates can also be used when listening through materials like brick, concrete, as well as other types of surfaces made from stone.
It can be a serious problem to have leaks occurring in the waste main and sewer line. These kinds of leaks usually run beneath lawns and yards. With the help of the soil probe, plumbers can listen for pressured leaks or standard pressure through rocks and grass.
When the equipment goes near the leak, a louder sound is also heard to allow the plumber to work out the location of the leak. Skilled and experienced plumbers can differentiate the different sounds that they hear to determine the specific type of leak there is, how deep the leak is, and the easiest way to access and repair it.
Thermal Imaging Cameras
A thermal imaging camera or heat scanner can also be used for finding hidden leaks behind walls, in hot water pipes, boiler servicing, concrete, and under floorboards. These specialized thermography cameras can also pinpoint problem spots that cannot be detected by the naked eye to reveal hidden water leaks that might have been out of sight otherwise. Thermography is a term used for describing infrared measurement and imaging cameras to measure and see thermal energy that an object emits.
Video Inspection Equipment
To detect leak in the most precise manner, plumbers can use the video pipe inspection equipment. It is a small camera that is mounted on the long flexible fibre optic cables. The plumber will then insert the camera in faucets as well as other plumbing outlets for leak detection.
The camera will relay back the image to a monitor in which the plumber will be able to view the condition of the pipe’s interior. It lets them locate the leak’s source that might be hard to see from outside and offers them additional details they need for fixing the leak.
Everyone already have an image in their mind of how their dream bathroom will look like. But, no matter what kind of bathroom you might want to have, the cost of the project is one of the things you need to consider.
The average cost of bathroom fitting in the UK for a new suite in standard-sized room of around 9 square meters will range from £2,500 up to £7,000. Installation of a typical bathroom in a small room measuring 4 square meters or less can cost you £1,500 to £5,000 when using a reliable plumbing company.
Meanwhile, new luxury fitted bathrooms that measures more than 10 square meters will cost you a minimum of £4,000 and this can go as high as £15,000 or even more. Take note that these approximate costs don’t include the extras required for the job just yet.
As far as new bathrooms are concerned, there are people who prefer complete bathroom renovation. There are also others who simply wish to install a shower cubicle in place of a bath or maybe only a bath panel will be fitted, a job that is comparatively smaller. Again, no matter what your idea of the perfect bathroom may be, everything will be your personal choice. However, at the end of the day, you would surely want to see a completed job you can proudly show off.
Newly fitted bathrooms come in a variety of sizes and shapes. But, all of them pretty much share similar fixtures expected to be found in any bathroom. The only difference lies in the finish and quality of the accessories used.
Factors That Affect the Costs of Bathroom Fitting
Here are some of the factors affecting the costs of fitting a bathroom in the UK:
The cost of a tap can be anywhere between £20 and £300 or higher.
This involves the need to build or knock through walls. Take note that changes in the structure, alterations to the shared drains, and changes in the use of a specific room such as transforming a box room into a bathroom will probably need a building warrant. If this is the case, the cost for warrant applications and drawings must also be taken into consideration.
This kind of changes can result in alternations to drains or pipework.
Bigger rooms mean that more areas need to be covered or tiled although working in these rooms may be easier for the installers.
Just like any profession or specialization, more skills and greater experience will cost you more.
At the end of the day, it is easy to see that the price you can expect to pay when fitting a bathroom in the UK will depend on a variety of factors. So, before you hire any company, don’t forget to consider these things so you can plan your budget accordingly and ensure that you don’t end up breaking the bank.
Have you always wanted to have a wet room but you are unsure if this will suit your home?
Wet rooms have now become very in demand as they work to add great value to UK homes. But, how much would it cost you to install a wet room anyway?
Cost of Wet Room Installation
Wet rooms are rooms that are completely waterproofed. These are built and designed to prevent the escape of water that can cause damage. Considering this, it can take a lot of work to build a wet room on the underlying structure and complete waterproofing is necessary before finishing off with all the visible parts.
The numbers stated below represent basic installation works. The job includes wall tiles, a wash basin, shower unit, toilet, and others. You will discover that the price varies based on the finish and style you are after. The labour costs of wet rooms generally remain at a relatively smaller percentage of the overall cost since most of the job has something to do with waterproofing and preparation.
There are several things that you need to remember here. For one, these costs are only average costs and these don’t include VAT yet. In addition, labour in the southeast and in London can increase by up to 20% so be sure to remember this, too.
Factors That Affect the Cost of Wet Rooms in the UK
There are several factors that affect the cost of turning your bathroom into a wet room and this depends on the level of sophistication that you prefer.
Average Labour Rates
The labour rates have minor effects on the total costs of the project. An estimate of the cost proportion for typical wet rooms implies that the materials make up around 85% of the overall costs with the labour making up just the remaining 15%.
The typical costs of labour range from as low as £150 up to £250 daily for skilled bathroom fitters, plumbers, or specialist wet room installers.
The process of installation can take as long as one week for two persons. This doesn’t involve the removal of the existing fixtures in the bathroom fitting. As expected, extras that go over and beyond an average basic wet room is going to cost more and take longer as well.
Starting from the planning stage, you need to decide on the supplier of the materials you will use. It will cost you more if the installer will do this since you will be paying for the time they will take. However, a specialist will know better what they are doing and you can trust them to buy the right items from the get-go.
Plumbing a new house is a complex job that involves more than simply fitting radiators and running pipes. An engineer is required in the different stages of the building process to address tasks that can range from testing the boiler to running the guttering.
Cost to Plumb a New House
It is a pricey and complicated job to plumb a new house. The average cost of installation of plumbing in a new house in the UK with one en-suite and one main bathroom is as follows:
The above quotes include the labour for general and bathroom installation of new pipework all over the property and having it connected to the mains service where required including sewerage, drainage, and water.
Your choice of fittings, fixtures, and pipes will have an effect on the price and also your property’s style and size and your location.
Factors That Affect Plumbing Cost
Every property and every job is unique and different yet there are specific factor that can affect all the quotes and costs for plumbing installation in general. The cost for plumbing installation will be higher for bigger jobs and larger properties. However, there are still many other variables that affect the prices of plumbing works. These include the following:
The costs of plumbing installation will be higher for properties and existing plumbing systems that are in poor condition.
If the property’s plumbing is difficult to access, this will increase the cost and this will include those to make good any affected area after the completion of the job.
Plumbing installation costs in new homes will vary all over the UK and cities like London tend to have more expensive new plumbing installation costs.
Installation or replacement of drainage and waste pipes can further increase the overall costs of plumbing work.
The cost of replacing plumbing will be higher if you specify more expensive fittings and fixtures.
Other Considerations for Plumbing Installation Costs
The following are additional costs you might need to pay during plumbing of your new house:
The total cost will factor in any prep work that the plumber needs to do prior to starting the job or before the arrival of your chosen tradesperson.
It is more expensive to hide pipework than to just surface mount it and leave it exposed. Expect to pay more if you want to have your pipework concealed.
Costs for plumbing may also include finishing any necessary painting or tiling.
If there is a need for your tradesperson to dispose of and remove any waste, this will also be included in the total cost of plumbing installation.
There are several factors considered for plumbing cost for a new house in the UK. Being familiar with these will help you set your budget accordingly.
Do you need some plumbing work done in your home? If yes, you probably want to know how much plumbers charge per day.
Location and Its Effects on Plumber Costs and Rates
The daily and hourly rates of plumbers and plumbing companies can vary considerably depending on the location. For example, daily rates in Central London are often the most expensive in the whole UK. On the other hand, in more rural places such as Scotland and Wales, you can expect that the daily rates of plumbers are much lower. Do remember that boiler services & heating engineers charge different rates entirely.
Day Rates of Plumbers
The day rates of plumbers depend on how complex the plumbing job is and the number of days of work is being offered. The day rate charges of plumbers are often exclusive of the materials used.
For instance, there are commercial site workers that charge £100 per £120 per day for some jobs such as second fixes. However, it is likely for their workload to be guaranteed for several months or even permanent in some instances.
One off day rates for plumbing are probably closer to the £250 range. A job quote that will likely bring in one to two weeks work is going to be closer to a range of £150 to £200 per day. This is the common range that most day rates for plumbing fall into.
You can expect that there will also be plumbers that will have higher daily rates than others e.g emergency plumbers. It can be because of huge workload because of recommendations, location, or simply because they are efficient and they can finish more work that average plumbers during average working days.
Hourly Rates of Plumbers
If you just need a job that will just take one to two hours or a quick-fix, you will get a fixed price depending on the hourly rate of the plumber.
You can expect to pay £25 to £40 without including the materials. This means that if a job will take 3 hours, you should be ready to pay £75 to £120 on top of the parts required for fixing your problem.
For smaller jobs that will only take one hour, the charge starts at £40 per hour or higher. For jobs that will take 2 to 5 hours to finish, it is likely that you will be paying anywhere near £25 to £30 per hour.
Now, these figures may seem a bit expensive. However, don’t forget that they will only charge for time-on site. The plumbers will need to consider the time to quote the job, fuel, travel, wear and tear on the vehicle, and others. All of these costs will quickly add up. This means that by the time they have picked up the materials for the job and complete the work, it is not likely that they will still have enough time to fit another job to their working day.
As for simpler jobs such as fixing taps or repairing a toilet that constantly overflows, the cost of materials will be minimal. But, if you will fit a basin or toilet, about £100 or more will be added to the overall cost.
Are there random bubbling noises that seem to pop out of nowhere every time you turn on your central heating system? Does it feel like you lose heat whenever your boiler is working hard? The most probable cause is the presence of air bubbles in the system. When this happens, you should bleed your boiler before things get worse to the point that you will need heating repair or worse, a replacement.
Bleed Your Boiler If There are Bubbles
The presence of air bubbles in the heating unit is actually common. The air may stay from the last time that the boiler was topped off. Poorly fitted ducts or leaks are also other causes. No matter what the reason might be, you need to bleed your boiler to be sure that your radiator will work efficiently and prevent oxidization of the ducts. There will also be a change in your electricity bill once you have completed the maintenance of your unit. It may be that you need a boiler replacement.
Steps for Bleeding Your Boiler
You will need a few pieces of supplies if you will try draining your boiler by yourself. Some of the materials you need include radiator bleed-key or a screwdriver, a towel, and a tray for collecting liquid. Here are the steps you need to follow to bleed your boiler safely and prevent damages to your system.
When Should You Bleed Your Boiler?
It is actually quite easy to tell if your boiler needs bleeding since the upper section is going to remain a lot cooler compared to the bottom section. There are even severe cases when the entire radiator remains cold even if the heating system has been turned on. It happens as the result of the trapped air displacing the hot water that typically heats up the radiator.
The air will then get released once the boiler is bled. The hot water is going to freely flow once the air has been released.
Make sure to bleed your boiler whenever needed to ensure that your unit functions properly at all times.
Plumbing is an essential step in installing a new toilet in the bathroom. While there are many reasons why you want to get a new toilet installed, what matters here is the fact that plumbing is something that you can never skip.
The own waste outlet of the toilet is the start of any toilet waste system while the soil stack is the main pipe. The stack is a vertical pipe with a length of 3 to 4 inches. This pipe drops into the sewer and this is connected to a pipe measuring 2 inches rising through the roof to offer venting.
Three basic fittings are required for connecting the new toilet to the existing stack. The first fitting holds down and seals the toilet. The second one directs the flow of water to the stack while the third one is what ties the new toilet to the stack.
Here are the steps to do plumbing for a toilet:
Info by Kettering Piperight Plumbing:
The boiler is the very heart of the central heating system of your beloved home. This is why having a new boiler installed tends to be a complicated and expensive process. One of the first steps you need to take before you get all too excited to buy a new boiler is to know how much it will take you to install one.
How Much Will It Cost You to Install a New Boiler?
Hiring a heating engineer for installing your new boiler has an average cost of about £2,000 to £3,000 and this price depends on the quality of your chosen boiler, its ease of installation, your location, and your chosen optional extras.
Prices of New Boilers
Here is a quick overview of cost estimates for hiring a professional tradesman to install your new boiler together with additional features:
Average Cost of New Boiler Installation
The average labour cost for new boiler installation is approximately £500 for straightforward jobs that would include simple replacement of the existing boiler with the new model and the use of the existing water and gas pipework.
However, the cost to replace the central heating system that includes the boiler plus controls or thermostat, on top of s plus new pipe for gas supply, and rerouting radiator water pipes can easily cost you £3,000. Most local heating contractors usually provide schemes for monthly payments of the new boiler or finance packages to let you spread over the payments for a few years to soften the blow and make it easier on your budget.
Installation Prices for Different Boiler Types
The fitting or installation cost to install new boilers is approximately £1,000 for all types of boilers. Below is a quick overview of the installation costs of different types of boilers:
Labour Timeframes and Costs
Gas safe engineers often charge anywhere from £150 up to £200 per day in labour. But, the job of having a new boiler fitted shouldn’t take much longer than one day unless there are plenty of pipeworks to be done or there is a need to move the boiler. It is also important to remember that the job can take one more day if the whole system will be power flushed depending on how many radiators are there and how badly the system required flushing.
Most boiler specialists often work in pairs to complete the job faster and for safety and health reasons as well. In cases like these, you may need to spend £250 to £30 a day for labour.
What Insurance Does a Plumbing Company Need in the UK?
Both plumbing companies and self-employed emergency plumbers in the UK need specialist insurance protection. The insurance policy of plumbers must provide the basic foundation of all essential covers including public liability insurance together with other options for cover to provide the required comprehensive protection.
Plumbing companies must get employer’s liability insurance. It is considered a legal requirement in almost all situations with the only exception having family members as employees.
Coverage of Public Liability Insurance for Plumbers
While it is not legally required to have a public liability insurance, this is still worthy to have for many good reasons. This will cover all financial liabilities that may occur as a result of your job. For instance, if there is a pipe leak after your work and the building incurs damage, the policy is going to pay customer with the set compensation amount.
Similarly, if any member of the public suffers from injury because of the plumber’s work, the plumber’s insurance policy will cover all compensation payments and legal costs that will arise.
Plumbers must be requested to present their public liability cover before the contract is awarded to them.
Coverage of Employer’s Liability Insurance for Plumbing Companies
Employer’s liability insurance is different from public liability insurance as this one is a legal requirement according to the Employers’ Liability or Compulsory Insurance Act 1969 for plumbing companies with one employee or more.
Based on the law, it is the responsibility of all employers to ensure the safety and health of their employees while doing their job. If an employee suffers from injuries while working or falls ill because of the job, they may sue the employer and receive compensation. This obligatory insurance cover is meant to cover the costs of successful compensation claims.
The law requires employees to have an employer’s liability cover of a minimum of £5 million although many policies actually offer coverage of at least £10m. It is possible to increase the amount as needed. The law also requires employers to present in the workplace a certificate of employers’ liability insurance. The company may be required to pay a fine worth £2,500 if it doesn’t have the right cover.
Having the necessary insurance doesn’t change the obligation of the employer to look after the safety and health needs of the workforce. The provider of employer’s liability insurance may refuse paying a claim or might file a case against the employer for compensation payments that it makes if it is proven that the employer ignored its responsibilities in relation to this.
Kettering Piperight Plumbing
Google Spread Sheet
Google My Map